Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-74
Considerations
Considerations
Consider the following points when using the STATS PROCESS command:
•
STATS PROCESS is a nonsensitive command without the RESET option, but a
sensitive command with the RESET option requiring super-group access.
•
The information contained in the displays produced for subordinate objects is
described under the individual command descriptions for each object.
Example
The following command displays statistics for the manager process, and then resets the
counters to zero:
->STATS PROCESS $ZNFS, RESET
The resulting display has the following format:
The display contains the following information:
Extended Memory Pool is the heading for statistics about the use of extended
memory in the manager process. When you specify RESET,
only the Maximum Used, Fail Count, and Reset Time values
are reset.
Reset Time is the time the PROCESS statistics were last reset using the
RESET option. If the PROCESS statistics have never been
reset, the reset time is the time the manager process was
started.
NFS Stats PROCESS \SYS1.$ZNFS
Extended Memory Pool
Reset Time.......... 28 Aug 1995, 11:33:13.259
Sample Time......... 28 Aug 1995, 12:10:50.890
Configured Size .... 96256
Current Size........ 89484 Maximum Used........ 95560
Current Fragments... 4 Maximum Fragments... 17
Growth Count........ 46 Fail Count.......... 0
Growth Time......... 28 Aug 1995, 11:50:03.285
Receive Queue
Reset Time.......... 28 Aug 1995, 11:33:13.259
Sample Time......... 28 Aug 1995, 12:10:50.890
Configured Limit.... 2000
Current Usage....... 1 Maximum Used........ 2
Openers
Reset Time.......... 28 Aug 1995, 11:33:13.259
Sample Time......... 28 Aug 1995, 12:10:50.890
Configured Limit.... 33
Current Usage....... 2 Maximum Used........ 2