Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-79
Examples
The resulting display has the following format:
The display contains the following information:
Objname is the name of the LAN object.
State is the summary state of the LAN object.
Restart indicates whether a subsequent START SUBSYS command will attempt to
restart the LAN interface process (YES) or will not attempt to restart it (NO).
The Restart attribute is turned on when the LAN object is placed in the
STARTED summary state and is only turned off when the LAN interface
process is stopped by an SCF STOP or ABORT command.
System is the number of the system on which the LAN interface process is running.
If the LAN object is not started, this field is blank.
PPID is the processor number and process identification number (PIN) of the LAN
interface process. If the LAN object is not started, this field is blank.
Trace indicates whether the LAN interface process is being traced (ON) or not
(OFF).
LastErr is the number of the last error encountered by the LAN interface process.
The following command displays the detailed status information for a LAN object
named $ZNFS.NFSLAN:
->STATUS LAN $ZNFS.NFSLAN, DETAIL
The resulting detailed display has the following format:
The detailed display contains the following information:
State is the summary state of the LAN object.
System Name is the name of the system on which the LAN interface process is
running.
System Number is the number of the system on which the LAN interface process is
running. If the LAN object is not started, this field is blank.
NFS Status LAN \SYS1.$ZNFS.NFSLAN
Objname State Restart System PPID Trace LastErr
NFSLAN STARTED YES 251 1,33 OFF 0
NFS Detailed Status LAN \SYS1.$ZNFS.NFSLAN
State............. STARTED System Name....... \KT22
System Number..... 212 Primary PID....... 0,72
Restart........... YES Trace............. ON
Trace File........ \SYS1.$SYSTEM.ZOSSNFS.TEMP
Last Error........ 26