Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-80
STATUS PROCESS Command
Primary PID indicates the processor number and process identification number
(PIN) of the LAN interface process.
Restart indicates whether a subsequent START SUBSYS command will
attempt to restart the LAN interface process (YES) or will not attempt
to restart it (NO). The Restart attribute is turned on when the LAN
object is placed in the STARTED summary state and is only turned
off when the LAN interface process is stopped by an SCF STOP LAN
or ABORT LAN command.
Trace indicates whether the LAN interface process is being traced (ON) or
not (OFF).
Trace File indicates the name of the file receiving the trace output.
Last Error is the number of the last error encountered by the LAN interface
process.
STATUS PROCESS Command
The STATUS PROCESS command returns status information for all objects that meet
the specified process-name, SUB, and SEL specifications.
You can display status information about the specified objects with or without detail.
The information contained in the displays produced by STATUS PROCESS is described
in detail under Examples
on page 2-81.
The STATUS PROCESS command has the following syntax:
PROCESS process-name
specifies the name of the PROCESS object for which status information is
requested.
DETAIL
specifies that detailed status information is requested.
SUB [ ALL | NONE | ONLY | subtype ]
specifies the subordinate object select option. You can specify SUB ALL to status
information about the PROCESS object and all objects subordinate to the
PROCESS object, SUB ONLY to request information about all objects subordinate
to the PROCESS object, or specify one of the object types to request information
about that object.
STATUS PROCESS process-name [ , DETAIL ]
[ , SUB [ ALL | NONE | ONLY | subtype ] ]
[ , SEL [ NOT ] state ]