Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-81
Considerations
SEL [ NOT ] state
specifies the summary state select option. You can use the SEL option to specify that
you are requesting status information about only objects in a specified summary
state. See Summary States on page 1-7 for the names and descriptions of these
states.
Considerations
Consider the following points when using the STATUS PROCESS command:
•
STATUS PROCESS is a nonsensitive command.
•
The STATUS PROCESS command does not alter the summary state of objects.
•
The information contained in the displays produced for subordinate objects is
described under the individual command descriptions for each object.
Examples
The following command reports the status of the $ZNFS process:
->STATUS PROCESS $ZNFS
The resulting display has the following format:
The display contains the following information:
Objname is the name of the PROCESS object.
State is the summary state of the primary process.
Tkovrs is the number of takeovers by the backup process that have occurred.
Backup is the state of the backup process.
System is the number of the system on which the process is running.
PPID is the process ID of the primary process.
BPID is the process ID of the backup process. If the backup process is not
running, this field is blank.
Trace indicates whether the process is being traced (ON) or not (OFF).
LastErr is the number of the last error encountered.
The following command displays the detailed status information for the $ZNFS process:
->STATUS PROCESS $ZNFS, DETAIL
NFS Status PROCESS \SYS1.$ZNFS
Objname State Tkovrs Backup System PPID BPID Trace LastErr
$ZNFS STARTED 0 STOPPED 206 1,194 OFF 0