Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-82
STATUS SERVER Command
The resulting detailed display has the following format:
The detailed display contains the following information:
System Name is the name of the system on which the process is running.
System Number is the number of the system on which the process is running.
State is the summary state of the primary process.
Primary PID is the process ID of the primary process.
Backup State is the state of the backup process.
Backup PID is the process ID of the backup process. If the backup process is not
running, the value NONE is displayed.
Trace indicates whether the process is being traced (ON) or not (OFF).
Takeovers is the number of takeovers by the backup process that have occurred.
Last Error is the number of the last error encountered.
STATUS SERVER Command
The STATUS SERVER command reports the status of a SERVER object.
You can display status information about SERVER objects with or without detail.
The information contained in the displays produced by STATUS SERVER is described
in detail under Examples
on page 2-83.
The STATUS SERVER command has the following syntax:
SERVER server-name
specifies the name of the SERVER object for which status information is requested.
DETAIL
specifies that detailed SERVER status information is requested.
NFS Detailed Status PROCESS \SYS1.$ZNFS
System Name....... \SYS1 System Number..... 212
State............. STARTED Primary PID....... 1,59
Backup State...... STOPPED Backup PID........ NONE
Trace............. OFF Takeovers......... 0
Last Error........ 0
STATUS SERVER server-name [ , DETAIL ] [ , SEL [ NOT ] state
]