Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-85
STATUS SUBSYS Command
STATUS SUBSYS Command
The STATUS SUBSYS command returns status information for all objects that meet the
specified process-name, SUB, and SEL specifications.
You can display status information about the specified objects with or without detail.
The information contained in the displays produced by STATUS SUBSYS is described
in detail under Examples
on page 2-86.
The STATUS SUBSYS command has the following syntax:
SUBSYS process-name
specifies the name of the SUBSYS object for which status information is requested.
The SUBSYS object uses the name of the manager process with which it is
associated.
DETAIL
specifies that detailed status information is requested.
SUB [ ALL | NONE | ONLY | subtype ]
specifies the subordinate object select option. You can specify SUB ALL to see
status information about the SUBSYS object and all objects subordinate to the
SUBSYS object, SUB ONLY to request information about all objects subordinate to
the SUBSYS object, or specify one of the object types to request information about
that object. If SUB is specified without an option, ALL is assumed.
SEL [ NOT ] state
specifies the summary state select option. You can use the SEL option to specify that
you are requesting status information about only objects in a specified summary
state. See Summary States on page 1-7 for the names and descriptions of these
states.
Considerations
Consider the following points when using the STATUS SUBSYS command:
•
STATUS SUBSYS is a nonsensitive command.
•
The summary state of an object does not prevent the STATUS SUBSYS command
from being completed successfully.
•
The STATUS SUBSYS command does not alter the summary state of objects.
STATUS SUBSYS process-name [ , DETAIL ]
[ , SUB [ ALL | NONE | ONLY | subtype ] ]
[ , SEL [ NOT ] state ]