Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS

Open System Services NFS SCF Reference Manual—522582-001

2-5

LIKE, SUB, and SEL Options

The LIKE option is not supported by OSS NFS for any SCF commands. The SUB or

SEL option is supported in a command only if shown in that command’s syntax

description in this section.

The SUB option allows you to restrict the operation of a command to specified

subordinate objects (subtypes). You can specify SUB ALL, SUB NONE, SUB ONLY,

or SUB subtype, where subtype is a subordinate object type.

ALL specifies that the command should be applied to the named object and all

subordinate objects.

NONE specifies that the command should be applied only to the named object.

ONLY specifies that the command should be applied only to the subordinate

objects.

subtype specifies that the command should be applied only to objects of the

specified object type.

If SUB is specified without any option added, ALL is assumed. For specific

information on which SUB options are supported or appropriate to each of the

commands, see the individual command descriptions.

The SEL option allows you to restrict the operation of a command based on the

summary states of objects. If the NOT keyword is included the command is restricted

to all objects NOT in the specified summary state. For specific information on which

summary states are supported or appropriate to each of the commands, see the individual

command descriptions.

Time-Value Format

Time values displayed by commands such as the INFO and STATS commands are

presented in the format HH:MM:SS.hhh, where HH is hours, MM is minutes, SS is

seconds, and hhh is thousandths of a second. For example, 11:43:53.775 is 11 hours, 43

minutes, 53 seconds, and 775 thousandths of a second. These time values reflect the

local civil time of the system node at which SCF is running.

ABORT LAN Command

The ABORT LAN command terminates the operation of the specified LAN interface

process as quickly as possible, regardless of whether network requests are pending or in

progress. Only enough processing to ensure the integrity of the subsystem is done. The

LAN object is left in the STOPPED summary state.

The ABORT LAN command has the following syntax:

ABORT LAN lan-name [ , SEL [ NOT ] state ]