Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-45
Considerations
The information contained in the displays produced by INFO LAN is described in detail
under Examples on page 2-45.
The INFO LAN command has the following syntax:
LAN lan-name
specifies the name of the LAN object for which attribute information is requested.
DETAIL
specifies that detailed LAN attribute information is requested.
SEL [ NOT ] state
specifies the summary state select option. You can use the SEL option to specify that
you are requesting attribute information about only LAN objects in a specified
summary state. See Summary States on page 1-7 for the names and descriptions of
these states.
Considerations
Consider the following points when using the INFO LAN command.
•
INFO LAN is a nonsensitive command.
•
Use the STATUS LAN command to obtain information about the current state of a
LAN object.
•
Use the STATISTICS LAN command to obtain statistical information about a LAN
object.
Examples
The following command displays information (without detail) about a LAN object
named NFSLAN:
->INFO LAN $ZNFS.NFSLAN
The resulting display has the following format:
Note. An asterisk (*) in any INFO command display indicates that you can change the value of
the attribute using the ALTER command.
INFO LAN lan-name [ , DETAIL ] [ , SEL [ NOT ] state ]
Note. An asterisk (*) in any INFO command display indicates that you can change the value of
the attribute using the ALTER command.
NFS Info LAN \SYS1.$ZNFS.NFSLAN
Objname *Process *Primary *Backup *Priority *TCP/IP
Process
NFSLAN $NFSL 1 -1 148 $ZTC0