Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-46
Examples
The display contains the following information:
Objname is the LAN object name.
Process is the name of the LAN interface process.
Primary is the number of the primary processor.
Backup is the number of the backup processor. A value of -1 indicates no
backup processor is defined and the LAN interface process will not be
restarted in case of failure.
Priority is the execution priority for the LAN interface process. If the priority
value is followed by the (DEFAULT) indicator, the LAN object is
configured to use the same priority as the manager process, and the
indicated value is the current manager process priority.
TCP/IP Process is the name of the TCP/IP process used by the LAN interface process.
The following command displays detailed information about the same LAN object:
->INFO LAN $ZNFS.NFSLAN, DETAIL
The resulting detailed display has the following format:
The detailed display contains the following information:
Process is the name of the LAN interface process.
Program is the file name of the LAN interface program.
Swap is the swap volume or swap file to be used when the LAN interface
process is started.
TCP/IP Process is the name of the TCP/IP process used by the LAN interface
process.
TCP/IP Host File is the name of the NonStop TCP/IP HOSTS file. If not specified,
NonStop TCP/IP uses a domain name resolver.
TCP/IP Resolver is the name of the NonStop TCP/IP resolver file. NonStop TCP/IP
ignores this attribute if a HOSTS file is specified. If neither a
NFS Detailed Info LAN \SYS1.$ZNFS.NFSLAN
*Process.......... $NFSL
*Program.......... $SYSTEM.ZOSSNFS.NFSLAN
*Swap............. $SWAP
*TCP/IP Process... $ZTC0
*TCP/IP Host File. $SYSTEM.ZTCPIP.HOSTS
*TCP/IP Resolver.. $SYSTEM.ZTCPIP.RESCONF
*Primary.......... 1 *Backup ......... -1
*Priority......... 148 (DEFAULT)
*Histogram........ 128, 256, 512, 1024, 2048, 4096
*Addr Check....... ON
*Domain Name...... sitexyz.com