Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-47
INFO NETGROUP Command
HOSTS file, nor a resolver file is specified, NonStop TCP/IP uses
the file $SYSTEM.ZTCPIP.RESCONF.
Primary is the number of the primary processor.
Backup is the number of the backup processor. A value of -1 indicates no
backup processor is defined and the LAN interface process will not
be restarted in case of failure.
Priority is the execution priority for the LAN interface process. If the
priority value is followed by the (DEFAULT) indicator, the LAN
object is configured to use the same priority as the manager
process, and the indicated value is the current manager process
priority.
Histogram is a list of the maximum lengths in bytes of messages counted in
each buffer used to produce the histogram statistics displayed by
the STATS LAN command.
Addr Check indicates whether the host name is checked (ON) or not checked
(OFF) when a mount or unmount request is received on the LAN
interface process.
Domain Name is the domains that correspond to the domain names specified when
defining NETGROUP objects. See ADD GROUP Command
on
page 2-11 for information on the use of domains.
INFO NETGROUP Command
The INFO NETGROUP command displays the current attribute values for the specified
NETGROUP object(s).
The information contained in the displays produced by INFO NETGROUP is described
in detail under “Examples.”
The INFO NETGROUP command has the following syntax:
NETGROUP netgroup-name
specifies the name of the NETGROUP object for which attribute information is
requested.
Considerations
Consider the following points when using the INFO NETGROUP command.
•
INFO NETGROUP is a nonsensitive command.
Note. An asterisk (*) in any INFO command display indicates that you can change the value of
the attribute using the ALTER command.
INFO NETGROUP netgroup-name