Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-48
Example
•
The DETAIL option is not allowed with the INFO NETGROUP command.
Example
The following command displays information (without detail) about a netgroup named
medaccts:
->INFO NETGROUP $ZNFS.medaccts
The resulting display has the following format:
The display contains the following information:
Member is a member of the netgroup, which can be another netgroup or a list
enclosed in parentheses that indicates a host name, user name, and domain
name.
INFO PROCESS Command
The INFO PROCESS command displays the current attribute values for the specified
PROCESS object. When combined with the SUB and SEL options, this command
displays the current attribute information for all objects that meet the specified process-
name, SUB, and SEL specifications.
You can display attribute information about the specified objects with or without detail.
The information contained in the displays produced by INFO PROCESS is described in
detail under “Examples.”
The INFO PROCESS command has the following syntax:
Note. An asterisk (*) in any INFO command display indicates that you can change the value of
the attribute using the ALTER command.
NFS Info NETGROUP \SYS1.$ZNFS.medaccts
*Member.......... (sunsys, marilyn, techco)
*Member.......... (tsys1, garyt, techco)
*Member.......... bldg3_labs
Note. An asterisk (*) in any INFO command display indicates that you can change the value of
the attribute using the ALTER command.
INFO PROCESS process-name [ , DETAIL ]
[ , SUB [ ALL | NONE | ONLY | subtype ] ]
[ , SEL [ NOT ] state ]