Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-49
Considerations
PROCESS process-name
specifies the name of the PROCESS object for which attribute information is
requested.
DETAIL
specifies that detailed attribute information is requested.
SUB [ ALL | NONE | ONLY | subtype ]
specifies the subordinate object select option. You can specify SUB ALL to request
information about the PROCESS object and all objects subordinate to the
PROCESS object, SUB ONLY to request information about all objects subordinate
to the PROCESS object, or specify one of the object types to request information
about that object.
SEL [ NOT ] state
specifies the summary state select option. You can use the SEL option to specify that
you are requesting attribute information about only objects in a specified summary
state. See Summary States
on page 1-7 for the names and descriptions of these
states.
Considerations
Consider the following points when using the INFO PROCESS command.
•
INFO PROCESS is a nonsensitive command.
•
Use the STATUS PROCESS command to obtain information about the current state
of the PROCESS object.
•
Use the STATISTICS PROCESS command to obtain statistical information about
the PROCESS object.
•
The information contained in the displays produced for subordinate objects is
described under the individual command descriptions for each object.
Examples
The following command displays information (without detail) about the manager
process $ZNFS:
->INFO PROCESS $ZNFS
The resulting display has the following format:
Note. An asterisk (*) in any INFO command display indicates that you can change the value of
the attribute using the ALTER command.
NFS Info PROCESS \SYS1.$ZNFS
Objname Primary *Backup *BackupDebug *DebugOnError *Collector
$ZNFS 10 -1 OFF OFF \SYS1.$0