Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-50
Considerations
The display contains the following information:
Objname is the PROCESS object name.
Primary is the number of the primary CPU.
Backup is the number of the backup processor. A value of -1 indicates no
backup processor is defined and the NFS manager process is not
being run as a process pair.
Backup Debug indicates whether the backup process should (ON) or should not
(OFF) be initiated in debug mode.
Debug On Error indicates whether the program enters (ON) or does not enter (OFF)
debug mode when a fatal error occurs.
Collector is the name of the EMS collector file.
The following command displays detailed information about the manager process
$ZNFS:
->INFO PROCESS $ZNFS, DETAIL
The resulting detailed display has the following format:
The detailed display contains the following information:
Program is the file name of the manager program.
Program Mod Time is the time the program file was last modified (modification
timestamp).
Msgfile is the name of the message template file used by the manager
process to generate text messages, if any.
Msgfile Mod Time is the time the message template file was last modified, if this file
is defined.
Collector is the name of the EMS collector file.
Logfile is the name of the manager process log file. The text
corresponding to any events generated by the manager process is
written to this file.
Data Swap Vol is the swap volume used for the process data stack (as specified
in the SWAP parameter of the RUN command).
NFS Detailed Info PROCESS \SYS1.$ZNFS
Program....... \SYS1.$SYSTEM.ZOSSNFS.NFSMGR
Program Mod Time. 30 Mar 1995, 16:33:24.110
*Msgfile.......... NONE
*Collector........ \SYS1.$0
*Logfile.......... NONE
Config Subvol.... \SYS1.$SYSTEM.ZOSSNFS
Data Swap Vol.... $SYSTEM Ext Mem Swap Vol. $SYSTEM
Primary.......... 0 *Backup........... 1
*Backup Debug..... OFF *Debug On Error... OFF