Open System Services NFS SCF Reference Manual

SCF Commands for OSS NFS
Open System Services NFS SCF Reference Manual—522582-001
2-60
Example
Example
The following command displays the names of all GROUP objects associated with the
manager process $ZNFS:
->NAMES GROUP $ZNFS.*
The resulting display has the following format:
NAMES LAN Command
The NAMES LAN command displays the names of all LAN objects that meet the
lan-name and SEL specifications.
This command is most useful if you use an object-name template. See Object-Name
Templates on page 1-6.
The NAMES LAN command has the following syntax:
LAN lan-name
specifies the name of the LAN objects to be returned.
SEL [ NOT ] state
specifies the summary state select option. You can use the SEL option to specify that
you are requesting attribute information about only LAN objects in a specified
summary state. See Summary States on page 1-7 for the names and descriptions of
these states.
Considerations
Consider the following point when using the NAMES LAN command:
•
NAMES LAN is a nonsensitive command.
Example
The following command displays the names of all LAN objects in the STARTED
summary state:
->NAMES LAN $ZNFS.*, SEL STARTED
NFS Names GROUP \SYS1.$ZNFS.*
GROUP
bin nobody software turtle
NAMES LAN lan-name [ , SEL [ NOT ] state ]