Open System Services Shell and Utilities Reference Manual (G06.25+, H06.03+)

User Commands (d - f) enoft(1)
ON Turns on case sensitivity in the enoft environment.
OFF Turns off case sensitivity in the enoft environment.
This is the default setting.
If case sensitivity is turned off, some file and procedure
names might not be correctly matched when commands
or flags are entered.
If the target object file contains C or C++ code, enoft automati-
cally turns on case sensitivity when the file is opened. For object
files containing code from a mix of C or C++ and other languages,
if the procedure or source scope for a flag or command is res-
tricted to a source file that does not contain C or C++ code, case
sensitivity is turned off but reverts to on when the scope restric-
tion is removed.
{FORMAT | -SF }{{ASCII | A }|{DECIMAL | D }
|{HEX | H}|{ICODE | IC }|{INNERLIST | IN }|
{ READABLE | R }}
Specifies the format used to display the object file.
ASCII | A Displays portions of the object file in ASCII for-
mat.
DECIMAL | D
Displays portions of the object file in decimal for-
mat.
HEX | H Displays portions of the object file in hexadecimal
format.
ICODE | IC Displays portions of the object file in disassembled
program code.
INNERLIST | IN
Displays portions of the object file in disassembled
program code and displays the source code inter-
spersed with the assembler. This option can be
used only for text dumps.
READABLE | R
Displays portions of the object file in an applicable
format based on the item type and part of the
object file being displayed. This is the default
action.
Specifying IN format_spec in another flag overrides the setting of
this attribute.
{HISTORYBUFFER | -SHB } number
Specifies the number of command lines in memory that are to be
available to the !, FC,orHISTORY subcommands. If the HIS-
TORYBUFFER attribute is not specified, the default value is 50
command lines.
Valid values for number are in the range from 0 (zero) to 65535.
If number is greater than the current buffer size, enoft is unable to
retrieve command lines that have already left the history buffer.
527188-003 Hewlett-Packard Company 3−93