OSF DCE Administration Guide--Introduction

Configuring DCE
Then dce_config script prompts:
Enter the name of the system control machine:
6. Type the name of the machine configured as the system control machine and press
<RETURN>. If you cell does not use a system control machine enter the name of
the local machine.
The dce_config script prompts:
Enter the filesystem type for the aggregate to be exported:
1. Native File System (e.g. UFS, JFS)
2. Episode File System (LFS)
selection:
Your next steps depend on whether you want to export the native file system or
the Episode file system. If you are exporting the native file system, go to the
subsection titled "Exporting the Native File System." If you are exporting the
Episode file system, go to the subsection titled "Exporting the Episode File
System."
Exporting the Native File System
To export the native file system, perform the following steps.
a. Type 1 and press <RETURN>.
The dce_config script prompts:
Enter the device name for the aggregate to be exported (i.e. /dev/lvXX):
Note: The information in parentheses in the previous prompt is not
the default value, but only an example of a value to be
entered.
b. Type the pathname of the device on which the selected file system is stored
and press <RETURN>.
The dce_config script prompts:
Enter the mount path for the aggregate (e.g. /usr/users):
Note: The information in parentheses in the previous prompt is not
the default value, but only an example of a value to be
entered.
c. Type the pathname to the aggregate’s mount point and press <RETURN>.
The dce_config script prompts:
Enter a unique aggregate name (e.g. user.jlw):
Note: The information in parentheses in the previous prompt is not
the default value, but only an example of a value to be
entered.
124244 Tandem Computers Incorporated 8− 19