OSF DCE Administration Guide--Introduction

OSF DCE Administration Guide—Introduction

d. Type a name for the aggregate and press <RETURN>. The aggregate

name must be unique on the machine being conﬁgured.

The dce_conﬁg script prompts:

Enter a unique numerical aggregate ID:

e. Type a number for the aggregate ID and press <RETURN>. The aggregate

ID must be unique on the machine being conﬁgured.

Exporting the Episode File System

To export the Episode File System, replica the following steps:

a. Type 2 and press <RETURN>.

The dce_conﬁg script prompts:

Enter the device name for the aggregate to be exported (i.e. /dev/lvXX):

Note: The information in parentheses in the previous prompt is not

the default value, but only an example of a value to be

entered.

b. Type the pathname of the device on which the selected ﬁle system is

stored and press <RETURN>.

The dce_conﬁg script prompts:

Enter the LFS fileset name (lfs_set):

c. Type the name of the LFS ﬁleset and press <RETURN>.

The dce_conﬁg script prompts:

Do you want to format partition device_name as an Episode aggregate [n]?.

d. Type y to initialize the device named in a previous prompt as the

aggregate to be exported as the Episode aggregate and press <RETURN>.

The dce_conﬁg script displays the following message:

S:****** device_name successfully initialized.

and then the following prompt:

Enter the LFS aggregate name (lfs_aggr):

e. Type a name for the Episode aggregate and press <RETURN>. The

aggregate name must be unique on the machine being conﬁgured.

The dce_conﬁg script prompts:

Enter the LFS aggregate id (1):

8− 20 Tandem Computers Incorporated 124244