OSF DCE Administration Guide--Introduction

OSF DCE Administration Guide—Introduction
c. Type the name of the LFS fileset and press <RETURN>.
The dce_config script prompts:
Do you want to format partition device_name as an Episode aggregate [n]?.
d. Type y to initialize the device named in a previous prompt as the
aggregate to be exported as the Episode aggregate and press <RETURN>.
The dce_config script displays the following message:
S:****** device_name successfully initialized.
and then the following prompt:
Enter the LFS aggregate name (lfs_aggr):
e. Type a name for the Episode aggregate and press <RETURN>. The
aggregate name must be unique on the machine being configured.
The dce_config script prompts:
Enter the LFS aggregate id (1):
f. Type a number for the aggregate ID and press <RETURN>. The aggregate
ID must be unique on the machine being configured.
After you complete the steps listed in "Exporting the Native File System" or
"Exporting the Episode File System," the dce_config displays information about
the aggregate and about the servers it is starting:
number of sites: 1
server flags aggr siteAge principal owner
host_name.ch.acme. RW 1 0:00:00 <nil>
FLDB entry created for fileset root.dfs (0,,1) on aggregate 1 of node_name
S:****** Starting dfsbind...
S:****** Starting fxd...
fx: FX server starts listening...
and returns the Additional Server Configuration menu.
8.8.5 Configuring GDA Servers
The DCE Global Directory Agent (GDA) facilitates communication between DCE
cells. If your cell will engage in intercell communication, the GDA server must be
running. This section describes how to configure GDA servers.
You can configure a GDA server only on a previously configured client or CDS server
machine.
8− 24 Tandem Computers Incorporated 124244