OSF DCE Administration Guide--Introduction

OSF DCE Administration Guide—Introduction

7.2.4 Installing the CDS Servers

You must install and conﬁgure at least one CDS server in each cell. For performance

reasons, you may install and conﬁgure more than one. To install a CDS server, type 2 at

the DCE Installation Menu and press <RETURN>.

7.2.5 Installing DTS Servers

It is recommended that you run at least three DTS servers in each cell and that you

conﬁgure at least one of those servers with a DTS Time Provider as described in Chapter

To install a DTS server, type 3 at the DCE Installation Menu and press <RETURN>.

7.2.6 Installing a GDS Server

To install a GDS server, type 4 at the DCE Installation Menu and press <RETURN>.

Note that when you install a GDS server, dce_conﬁg automatically installs the DCE

client binaries if necessary.

7.2.7 Installing the DFS Servers

To install the DFS Servers, perform the following steps:

1. At the DCE Installation Menu, type 5 and press <RETURN>.

The dce_conﬁg script displays the DFS Server Installation menu:

Four types of DFS Server installations are valid.

1. System Control Machine

2. Private File Server

3. File Server

4. Fileset Location Database Server

selection:

2. Select the type of server you want to install by typing its associated selection

number, and pressing <RETURN>.

The steps to perform the installation and the prompts you must answer for each

type of DFS server are the same. The following steps show the installation of a

7− 10 Tandem Computers Incorporated 124244