OSI PICS Manual

ISO 8327, Version 2 for OSI/AS
Tandem OSI PICS Manual–135046
9-4
F.1 Date of Statement
D Column
The D column reflects the definitions in the International Standard. Each entry in this
column is chosen from the following list:
I Column
The I column describes the actual capabilities of the implementation and shall be
completed by the supplier using a symbol chosen from the following list:
Value Column
The implementation specifies in the “Value” column any implementation restriction
imposed to the range of values which is specified in the Standard.
F.1 Date of Statement
F.2 Implementation Details
The supplier of the protocol implementation shall specify the information necessary to
uniquely identify the implementation and the systems in which it may reside. This may
include details of:
1. supplier, implementation name, operating system, suitable hardware;
2. system supplier and/or client of the test laboratory that is to test the implementation;
3. information on whom to contact if there are queries concerning the content of the
PICS;
4. the relationship between the PICS and the System Conformance Statement for the
System (see note).
Symbol Meaning
m Mandatory
o Optional (not mandatory)
cn Conditional (where n indicates the number of the condition which applies)
Symbol Meaning
N Item is not implemented
Y Item is implemented (subject to value qualification)
— Item is not applicable
1 Date of Statement (yy-mm-dd): 90-08-23
Note. The System Conformance Statement is defined in ISO 9646. It contains a declaration
of the layers of the Reference Model covered by the implementation to be tested.