OSI PICS Manual

ISO 8823 for OSI/AS
Tandem OSI PICS Manual–135046
10-12
B.5.1 Guidance for Completion
The I column describes the actual capabilities of the implementation and shall be
completed by the supplier using a symbol chosen from the following list:
The supplier shall use the “Value” column to indicate restrictions by the imposed
implementation on parameter value and length. If there is insufficient space to fully
describe restrictions on a particular parameter, the “Other Information” box at the end of
this section shall also be used. This applies in particular to the “User Data” parameter,
which shall also be described in clause B.5.
For all parameters of datatype OCTETSTRING or BITSTRING, restrictions on the
depth of encoding nesting must be specified.
Symbol Meaning
X Not supported
I Supported
— Not applicable