OSI PICS Manual

ISO 8823 for OSI/AS
Tandem OSI PICS Manual–135046
10-22
B.5.17 Other Information
B.5.17 Other Information
B.6 Support of Syntaxes
B.6.1 Transfer Syntaxes Supported
This section shall be used to indicate which transfer syntaxes the implementation
supports. For each transfer syntax supported a reference to the definition of the transfer
syntax shall be given. Implementation restrictions with respect to the encoding
variations as offered by a transfer syntax shall be stated separately and referenced in the
following table where applicable.
B.6.2 Abstract Syntaxes Supported
This section shall be used to indicate which abstract syntaxes the implementation
supports.
Ref Response
1 Context identifiers may be integers from 0 to 32767.
2 Object identifiers for Abstract syntaxes and Transfer syntax may be up to 16 identifiers long.
3 Maximum number of presentation contexts is 16.
Ref Type Detail
Support
Ye s /N o
Ref to
Definition
Ref to
Restriction
1 Object identifier joint-iso-ccitt asn1(1)
basic-encoding(1)
YES ISO 8825
2 Object identifier
3 Object identifier
Note. From the Presentation standard point of view, an implementation shall support any
standardized abstract syntax. However, for technical and economic reasons each
implementation can only support a limited number of abstract syntaxes.
Ref Type Detail Support
Ye s / No
1 Object descriptor ISO 8650-ACSE-1 YES
2 Object identifier joint-iso-ccitt association-control(2)
abstract-syntax(1) apdus(0) version1(1)
YES
3 Object descriptor
4 Object identifier