OSI PICS Manual

ISO 8571 for FTAM
Tandem OSI PICS Manual–135046
12-30
A.12 Expanded PDU Field Detail
Alternative details of the response FTAM QoS details may be attached as an appendix.
A.12.9 Details of Shared ASE Information
The mode of use of the shared ASE information field will be highly dependent upon the
nature of the symbiotic ASE. Implementations claiming to support the shared ASE
information field shall include a reference here to an appendix providing complete
details of its use.
A.12.10 Details of Charging
State charging details if the charging parameter is implemented.
20 2 Both 1 o No o No o No o No o No
21 2 Both 0 o No o No o No o No o No
22 3 Neither 3 o No o No — — — — — —
23 3 Neither 2 o No — — — — — —
24 3 Neither 1 o No o No — — — — — —
25 3 Neither 0 o No o No — — — — — —
26 3 Restart 3 o No o No o No — — — —
27 3 Restart 2 o No o No o No — — — —
28 3 Restart 1 o No o No o No — — — —
29 3 Restart 0 o No o No o No — — — —
30 3 Recovery 3 o No o No — — o No — —
31 3 Recovery 2 o No o No — — o No — —
32 3 Recovery 1 o No o No — — o No — —
33 3 Recovery 0 o No o No — — o No — —
34 3 Both 3 o No o No o No o No o No
35 3 Both 2 o No o No o No o No o No
36 3 Both 1 o No o No o No o No o No
37 3 Both 0 o No o No o No o No o No
Tandem Implementation Note. This field is not supported by Tandem FTAM. The parameter
on incoming PDUs will be ignored, but use of the parameter will not cause a connection failure.
Tandem Implementation Note. Charging details are not implemented by Tandem FTAM.
Request Response
FTAM QoS
Supported
Values
Recovery or
Restart
FUs
Supported
FTAM
QoS
Values
Supported
FTAM QoS
Values Functional Units
Neither Restart Recovery Both