OSI PICS Manual

ISO 8571 for FTAM
Tandem OSI PICS Manual–135046
12-34
Section 6 Document Type Detail
A.12.17 Processing Mode
State which processing modes are capable of being specified and which accepted. The
validity and applicability of these for any instances of communications will be subject at
least to the constraints of ISO 8571.
A.12.18 Recovery Mode
If the recovery mode parameter is implemented, state the implemented values for
initiator and responder here.
Section 6 Document Type Detail
A.13 Document Types
Conformance to document types is given at two levels. The following table shall be
completed to indicate which document types have some level of support. The detail of
that level of support shall be stated in the following tables.
Processing Mode D I R
1 Read o Yes Yes
2 Insert o Yes Yes
3 Replace o Yes Yes
4 Extend o Yes Yes
5Erase o Yes Yes
Tandem Implementation Note. The recovery mode parameter is not implemented by Tandem
FTAM.
Recovery mode D I R
1 None o No No
2 At start of file o No No
3 Any active checkpoint o No No
Entry Number FTAM-1 D I R
1 Object descriptor ISO FTAM unstructured text o Yes Yes
Object identifier {iso standard 8571 document-type (5)
unstructured-text (1) }
Entry Number FTAM-2 D I R
2 Object descriptor ISO FTAM sequential text o Yes Yes
Object identifier {iso standard 8571 document-type (5)
sequential-text (2) }