OSI PICS Manual

CCITT X.400: RTS for MHS
Tandem OSI PICS Manual–135046
14-6
5.1 PConnect Element
Abbreviation(s)
5.1 PConnect Element
Instructions for Client
Please fill in the IMP. (IMPlemented) VALUE Columns in this way:
•
For the checkpointSize and windowSize fields:
1. ORIG. (ORIGinator) Column: put either the range, in this case you need to
indicate the minimum and the maximum value in the range (i.e. 0:6), or the
complete set of values (i.e. 0,2,5) that the IUT is able to propose as
ORIGINATOR of the PConnect RTS Element.
2. REC. (RECeiver) Column: put either the range or the complete set of values
that the IUT is able to accept as RECEIVER of the PConnect RTS Element.
•
For the dialogueMode field:
1. ORIG. (ORIGinator) Column: put the set of values, corresponding to the form
of dialogue supported by the IUT, that the IUT is able to propose as Originator
of the PConnect.
2. REC. (RECeiver) Column: put the set of values, corresponding to the form of
dialogue supported by the IUT, that the IUT is able to accept as Receiver of the
PConnect.
Sts.: Status
Supp.: Supported
Std.: Standard
Imp.: Implemented
Orig.: Originator
Rec.: Recipient
Note.
1. Optional Parameters which are not supported for Reception should not be regarded as
protocol violations.
2. In the following table every heading parameter marked “m” should be supported by the IUT
in order to fulfill the static conformance review. Every sub-parameter marked “m” should
be supported if the corresponding heading parameter is supported by the IUT.