OSI PICS Manual

ISO 8073 for OSI/TS
Tandem OSI PICS Manual–135046
5-7
D.9.3 Supported Functions for Class 2 (C2::)
The following functions are optional if class 1 is supported.
D.9.3 Supported Functions for Class 2 (C2::)
The following functions are mandatory if class 2 is supported.
T1F6 Connection establishment 6.5
T1F7 Connection refusal 6.6
T1F8 Normal release when operating over CONS (explicit) 6.7.1
T1F9 Association of TPDUs with transport connections when operating over
CONS
6.9.1
T1F10 Data TPDU numbering (normal) 6.10
T1F11 Expedited data transfer when operating over CONS (network normal) 6.11.1
T1F12 Reassignment after failure when operating over CONS 6.12
T1F13 Retention until acknowledgement of TPDUs (AK) 6.13
T1F14 Resynchronization 6.14
T1F15 Explicit flow control (without) 6.16
T1F16 Non-use of checksum 6.17
T1F17 Frozen references 6.18
T1F18 Treatment of protocol errors when operating over CONS 6.22.1
Index Function References Status Support
T1F19 Concatenation 6.4 O No
T1F20 Expedited data transfer when operating over
CONS (network expedited)
6.11.1 O No
T1F21 Retention until acknowledgement of TPDUs
confirmation of receipt
6.13 O No
Index Function References
T2F1 Assignment to network connection when operating over CONS 6.1.1
T2F2 TPDU transfer 6.2
T2F3 Segmenting 6.3
T2F4 Reassembling 6.3
T2F5 Separation 6.4
T2F6 Connection establishment 6.5
T2F7 Connection refusal 6.6
T2F8 Normal release when operating over CONS (explicit) 6.7.1
T2F9 Error release when operating over CONS 6.8
T2F10 Association of TPDUs with transport connections when operating over
CONS
6.9.1
T2F11 Data TPDU numbering (normal) 6.10
T2F12 Expedited data transfer when operating over CONS (network normal) 6.11.1
Index Function References