OSI PICS Manual

Contents
Tandem OSI PICS Manual–135046
vii
5. ISO 8073 for OSI/TS (continued)
5. ISO 8073 for OSI/TS (continued)
Protocol Supplier (if not the system supplier) 5-4
Reference Protocol Identification
5-4
IUT Identification
5-4
D.3 Index of Indices Used in this Document
5-4
D.4 Base Standard/Recommendation Conformance
5-5
D.5 General Statement of Conformance
5-5
D.6 Protocol Implementation
5-5
D.6.1 Addendum 1—NCMS
5-5
D.6.2 Classes Implemented
5-5
D.7 NCMS Functions
5-5
D.8 Initiator/Responder Capability for Protocol Classes 0-4
5-6
D.9 Supported Functions
5-6
D.9.1 Supported Functions for Class 0 (C0::)
5-6
D.9.2 Supported Functions for Class 1 (C1::)
5-6
D.9.3 Supported Functions for Class 2 (C2::)
5-7
D.9.4 Supported Functions for Class 3 (C3::)
5-8
D.9.5 Supported Functions for Class 4 (C4 or C4L::)
5-9
D.10 Supported TPDUs
5-10
D.11 Supported Parameters of Issued TPDUs
5-11
D.11.1 Supported Parameters for NCMS (A1::)
5-11
D.11.1.1 UN TPDU (SN1::)
5-11
D.11.1.2 NCM TPDU (SN3::)
5-12
D.11.1.3 DIAG TPDU (SN5::)
5-12
D.11.2 Parameter Values for CR TPDU (C1:: or C2:: or C3:: or C4:: or
C4L::) 5-12
D.11.3 Supported Parameters for Class 0 TPDUs (C0::)
5-12
D.11.4 Supported Parameters for Class 1 TPDUs (C1::)
5-13
D.11.5 Supported Parameters for Class 2 TPDUs (C2::)
5-14
D.11.6 Supported Parameters for Class 3 TPDUs (C3::)
5-15
D.11.7 Supported Parameters for Class 4 TPDUs (C4 or C4L::)
5-16
D.12 Supported Parameters for Received TPDUs
5-17
D.12.1 Supported Parameters for NCMS (A1::)
5-17
D.12.1.1 UN TPDU (SN1::)
5-17
D.12.1.2 NCM TPDU (SN4::)
5-17
D.12.1.3 DIAG TPDU (SN6::)
5-18
D.12.2 TPDUs in Class 4 (C4 or C4L::)
5-18
D.13 User Data in Issued TPDUs
5-19
D.13.1 Class 1 (C1::)
5-19