OSI PICS Manual

ISO 8073 for OSI/TS
Tandem OSI PICS Manual–135046
5-8
D.9.4 Supported Functions for Class 3 (C3::)
The following functions are optional if class 2 is supported.
D.9.4 Supported Functions for Class 3 (C3::)
The following functions are mandatory if class 3 is supported.
T2F13 Demultiplexing when operating over CONS 6.15
T2F14 Explicit flow control (with) 6.16
T2F15 Non-use of checksum 6.17
T2F16 Treatment of protocol errors when operating over CONS 6.22.1
T2F17 Multiplexing when operating over CONS 6.15
Index Function References Status Support
T2F18 Concatenation 6.4 O No
F2F19 Data TPDU numbering (extended) 6.10 O Yes
T2F20 Explicit flow control (without) 6.16 O No
Index Function References
T3F1 Assignment to network connection when operating over CONS 6.1.1
T3F2 TPDU transfer 6.2
T3F3 Segmenting 6.3
T3F4 Reassembling 6.3
T3F5 Separation 6.4
T3F6 Connection establishment 6.5
T3F7 Connection refusal 6.6
T3F8 Normal release when operating over CONS (explicit) 6.7.1
T3F9 Association of TPDUs with transport connections when operating over
CONS
6.9.1
T3F10 Data TPDU numbering (normal) 6.10
T3F11 Expedited data transfer when operating over CONS (network normal) 6.11.1
T3F12 Reassignment after failure when operating over CONS 6.12
T3F13 Retention until acknowledgement of TPDUs (AK) 6.13
T3F14 Resynchonization 6.14
T3F15 Demultiplexing when operating over CONS 6.15
T3F16 Explicit flow control (with) 6.16
T3F17 Non-use of checksum 6.17
T3F18 Frozen references 6.18
T3F19 Treatment of protocol errors when operating over CONS 6.22.1
T3F20 Multiplexing when operating over CONS 6.15
Index Function References