TS Supplement (Includes RFC-1006 Support)

8 General OSI/AS and OSI/TS

Manual Changes and

Corrections

107751 Tandem Computers Incorporated 8–1

This section contains information of general interest to OSI/AS and OSI/TS users (not

just RFC-1006 users). This section contains the following information:

Descriptions of external changes that have been made since the C30.08/D10

product release of OSI/AS and OSI/TS

Changes and corrections to the C30.08/D10 release of the OSI/AS and OSI/TS

manuals

This section is organized by of the Tandem Problem Report (TPR) that describes the

problem.

S 940706 1744 6249

Summary

The SCF #L3 SERVICE attribute ESISHOLDTIME has a new default value.

Manuals Affected

Tandem OSI/AS Configuration and Management Manual

SCF Reference Manual for Tandem OSI/AS

Tandem OSI/AS Management Programming Manual

Tandem OSI/TS Manual

SCF Reference Manual for Tandem OSI/TS

Tandem OSI/TS Management Programming Manual

Detailed Description

The default value for the #L3 SERVICE attribute ESISHOLDTIME is 120 seconds. In

the SCF interface this value is expressed as 120.00. In the MPM interface, this value is

expressed as 12000.

S 940126 1633 9718

Summary

The Tandem OSI/AS Programming Manual doesn’t properly describe the use of X.410-

1984 mode.

Manuals Affected

Tandem OSI/AS Programming Manual