TS Supplement (Includes RFC-1006 Support)

General OSI/AS and OSI/TS Manual Changes and Corrections

107751 Tandem Computers Incorporated 8–13

2. some implementations require the binary value %H03010100 be included in the

CUD Field to identify the Transport entity

3. some implementations require another binary value of up to 16 bytes (or 32

characters) of user-defined information be specified.

OSI/TS users can now explicitly enable the sending of the transport protocol ID

%H03010100 or a CUD Field value of their choice.

The following exceptions apply:

Fast Select is not supported.

The Call User Data Field is always set to %H81000000 for the Subnetwork

Dependent Convergent Function (SNDCF).

The syntax of this PARAM is:

PARAM TSP^PROTO^ID [ ON | OFF |

value

]

value

can be an even number of hexadecimal digits between 2 to 32 digits in length. If

the TSP process detects an error in the value provided, it sets the TSP^PROTO^ID

to OFF.

Default: OFF

Examples:

PARAM TSP^PROTO^ID ON

This example sets the CUD field to identify the Transport entity to %H03010100.

PARAM TSP^PROTO^ID F1000000

This example sets the CUD field to identify the Transport entity to %HF1000000.

S 931116 1706 14562

Summary

The description of the ranges of values for the MAXCONNECTIONS attribute needs

clarifying.

Manuals Affected

SCF Reference Manual for Tandem OSI/TS

Tandem OSI/TS Management Programming Manual

Detailed Description

The description for MAXCONNECTIONS should read as follows: