TS Supplement (Includes RFC-1006 Support)

Configuring OSI/TS

RFC-1006 Subsystem Configuration

107751 Tandem Computers Incorporated 2–5

Configuring OSI/TS,

TCP/IP, and NSP Processes

This section describes how to configure OSI/TS with TCP/IP and the underlying

subsystems. Figure 2-1 shows configurations on four separate Tandem systems.

Figure 2-1 only shows TLAM connections, however, the same configurations can be

made when connecting TCP/IP to X25AM IOPs.

System A has a simple configuration, with one OSI/TS process connected to one

TCP/IP process, connected to one TLAM I/O process (IOP).

System B shows that multiple OSI/TS processes can connect to one TCP/IP

process.

System C shows a configuration with multiple TLAM IOPs. One TCP/IP process

can be associated with more than one TLAM IOP. However, one TLAM IOP can

connect to only one TCP/IP process.

System D shows a configuration with multiple TCP/IPs connecting to one

OSI/TS.