TS Supplement (Includes RFC-1006 Support)

OSI/TS SCF Commands Changed to Support RFC-1006

RFC-1006 Changes to the SCF, SPI, and PTrace Subsystems

3–10 107751 Tandem Computers Incorporated

RemoteNSAP

shows the remote IP address. Both the dotted decimal notation and the eight-digit

hexadecimal string are displayed.

NSP:

You must issue the appropriate TCP/IP SCF command to obtain information on

the TCP/IP subsystem.

INFO SERVICE #L4 The format of the display for the INFO SERVICE #L4 command without the DETAIL

option is:

OSITS Info SERVICE

Name *Class *TPDUSize *Expedited

$WHC1.#L4 0 512 OFF

Class (ZCLASS)

shows the preferred protocol class.

TPDUSize (ZTPDU-SIZE)

shows, in octets, the maximum length of a TPDU.

Expedited (ZEXPEDITED)

shows whether the transport expedited data transfer service is supported.

The format of the display for the INFO SERVICE #L4 command with the DETAIL

option is:

OSITS Detailed Info SERVICE $WHC1.#L4

*AltClass................ 0 *Checksum................ OFF

*CheckTSel............... OFF *Class................... 0

*ConnectTimeout.......... 0:02:00.000 *DisconnectTimeout....... 0:02:00.000

*Expedited............... OFF *ExtendedFormat.......... OFF

*InactiveTimeout......... 0:00:30.000 *InboundCRConfErrThld.... 0

*InboundCRCongestionThld. 0 *InboundCRProtoErrThld... 0

*InboundTPDUProtoErrThld. 0 *InboundTPDUXsumErrThld.. 0

*L4TimeoutThld........... 0 *L4Window................ 4

*MaxRexmit............... 3 *Multiplex............... OFF

*NetType................. A *OutboundCRConfErrThld... 0

*OutboundCRErrThld....... 0 *OutboundTPDUProtoErrThld 0

*PassiveMux.............. OFF

*RecvSecurity............

*RefTimeout.............. 0:00:30.000 *RexmitTimeout........... 0:00:10.000

*SendSecurity............

*TConPri................. 0 *TPDUSize................ 512

*TTRTimeout.............. 0:01:30.000

*TWRTimeout.............. 0:02:00.000 *WindowTimeout........... 0:00:10.000