TS Supplement (Includes RFC-1006 Support)

OSI/AS SCF Commands Changed to Support RFC-1006

RFC-1006 Changes to the SCF, SPI, and PTrace Subsystems

3–16 107751 Tandem Computers Incorporated

ADD ENTRY #APPL The following

attribute-specs

for the ADD ENTRY #APPL command have new

meaning when using RFC-1006:

[ L3SERVER

indirect-process-name

]

[ NSAP

string

]

L3SERVER (ZL3-SERVR)

defines the name of the TCP/IP process that establishes the TCP connection for

this #APPL entry. This attribute is used only for local entry names.

Value: An NSP process name in the following format:

osi-mgr-name

.#NSP.

internal-name

Default: No default value is provided.

NSAP (ZNSAP)

defines the IP address for the local or remote #APPL entry being added.

Value: Dotted decimal notation or eight-digit hexadecimal string.

Default: No default value is provided.

ADD ENTRY #NSAP The following

attribute-spec

for the ADD ENTRY #NSAP command has a new

meaning when using RFC-1006:

[ NETADDR-MODE { NORMAL | X25-1980 } ]

NETADDR-MODE (ZNETADDR-MODE)

When TCP/IP is the NSP, OSI/AS uses the NSAP entry to specify IP addresses.

OSI/AS only uses the NSAP entry when the NETADDR field is set to NORMAL.

If NETADDR is set to X25-1980, NSAP entries are not forwarded to OSI/TS from

OSI/AS.

Value: NORMAL | X25-1980. For TCP/IP networks, NORMAL is the only

value that can be used.

Default: NORMAL

ADD ENTRY #SNPA The SNPA entry name only represents a Tandem internal number, not the real local

SNPA address. It is used internally to eventually associate an NSP process with an

NSAP address (IP address). The NSP process handles all connections that use the

specified NSAP address. For more details on internal numbers, refer to the SCF

Reference Manual for Tandem OSI/AS.