TS Supplement (Includes RFC-1006 Support)

OSI/AS SCF Commands Changed to Support RFC-1006

RFC-1006 Changes to the SCF, SPI, and PTrace Subsystems

3–22 107751 Tandem Computers Incorporated

Use the INFO SU command to see the value of the configured TPDUSIZE. Use the

STATUS SU command to see the actual TPDUSIZE used when the connection was

established.

Value: 128 | 256 | 512 | 1024 | 2048 | 4096 | 8192 | 16384 | 32768 | 65531

Note The OSI/AS MAXCONNECTIONS attribute can restrict the size of the SPDU sent to OSI/TS. Specifying a

smaller value for MAXCONNECTIONS allows the TAPS process to send larger SPDUs. Both the

Tandem OSI/AS SCF Reference Manual and the Tandem OSI/AS Configuration and Management

Manual discuss the MAXCONNECTIONS attribute in more detail.

ALTER SERVICE #L4 The following

attribute-specs

for the ALTER PROFILE #L4 command have new

meaning when using RFC-1006:

[ CLASS { 0 | 1 | 2 | 3 | 4 } ]

[ EXPEDITED { ON | OFF } ]

[ TPDUSIZE

{ 128 | 256 | 512 | 1024 | 2048 | 4096 |

8192 | 16384 | 32768 | 65531 } ]

CLASS (ZCLASS)

specifies the preferred transport protocol class.

Value: For TCP/IP networks, CLASS must be 0. If you specify a value other

than 0, during connection establishment, OSI/TS will reject the

connection attempt.

Default: 0

EXPEDITED (ZEXPEDITED)

specifies whether the transport expedited data transfer service is supported.

Value: ON | OFF

Default: OFF