TS Supplement (Includes RFC-1006 Support)

Other Useful SCF Commands

RFC-1006 Changes to the SCF, SPI, and PTrace Subsystems

3–40 107751 Tandem Computers Incorporated

OutboundTPDUProtoErr

is the number of times OSI/TS receives a DR-TPDU or ER-TPDU as the response

to any TPDU it initiated other than the CR-TPDU.

OutboundTPDUProtoErrThld

shows the threshold number against which the counter OutboundTPDUProtoErr

is compared.

Current-Tcon

shows the number of open transport connections; it is modified every time a

transport connection is established or released.

Max-ever-Tcon

shows the maximum number of transport connections ever counted.

INFO SUBNET Use the TCP/IP SCF INFO SUBNET command to see the subnet configuration of the

specified TCP/IP process.

The format of the display for the INFO SUBNET command is:

SCF> INFO SUBNET *

TCPIP Info SUBNET \SYSA.$ZTC0.*

Name Devicename *IPADDRESS TYPE *SUBNETMASK

#LOOP0 \NOSYS.$NOIOP 127.0.0.1 LOOP-BACK %HFF000000

#EN1 \SYSA.$LAM3 130.252.12.3 ETHERNET %HFFFFFF00

#EN2 \SYSA.$LAM2 130.252.111.236 ETHERNET %HFFFFFF00

Name

is the name of the subnet.

Devicename

is the name of the TLAM I/O process or X25AM device with which the subnet

interfaces. Note that with loopback subnets, the value \NOSYS.$NOIOP (no

system, no device name) is displayed. This value is displayed because loopback

subnets are routed internally so that there is no device name to display.

IPADDRESS

is the Internet address of this subnet.

TYPE

is the subnet type.