OSI/AS Configuration and Management Manual

Installing and Configuring the Subsystem
OSI/AS Configuration and Management Manual—424119-001
4-36
Step-by-Step Configuration Example
Step-by-Step Configuration Example
Figure 4-3 gives a step-by-step example of configuring an application over an X.25
network.
The steps shown in Figure 4-3
on page 4-36 are as follows:
Figure 4-3. Step-by-Step Configuration Example
User
Session
Transport
Network
043CDT .CDD
ADD PROCESS
$OSIM.#TSP.TSP1, &
CODEFILE TSPOBJ, &
NAME $TSPA
ADD ENTRY &
$OSIM.#NSAP.30104085551212,&
L4SERVER #TSP.TSP1, &
L4PROFILE #L4.TPF2, &
SNPA 01, &
NETADDR-MODE X25-1980
ADD PROFILE
$OSIM.#L4.TPF2, &
CLASS 2, &
MULTIPLEX ON, &
NETTYPE B
ADD PROCESS
$OSIM.#NSP.NSP1, &
NAME $X25A
ADD ENTRY
$OSIM.#SNPA.01, &
L3SERVER #NSP.NSP1, &
L3PROFILE #L3.NPF0
ACSE and presentation
services are selected and
controlled by your
application.
ADD PROFILE
$OSIM.#L5.L5VSN2, &
VSN1 OFF, &
VSN2 ON
ADD PROCESS
$OSIM.#TAPS.TAP1, &
CODEFILE TAPSOBJ, &
NAME $TAPA
ADD ENTRY
$OSIM.#TSEL.444401, &
L5SERVER #TAPS.TAP1 &
L5PROFILE #L5.L5VSN2
Application
ACSE and
Presentation
Layers
LayerLayer
Layer
PROCESS ENTRY PROFILE
In your application, define the
application name:
LOCAL
ADD ENTRY
$OSIM.#APPL.LOCAL, &
PSEL 666601, &
SSEL 555501, &
TSEL 444401, &
NSAP 30104085551212
Application services are
selected and controlled by
your application.
1
2
34 5
6
7
8
9
10
11
ADD PROFILE
$OSIM.#L3.NPF0, &
X25DESTADDR &
"30104089991212", &
X25PORT 00