OSI/AS Configuration and Management Manual

Troubleshooting Guide
OSI/AS Configuration and Management Manual—424119-001
8-25
Troubleshooting Example
Next, you should find out if this subdevice really did receive an incoming connect
request SPDU.
The SCF command
stats su $tap1.#z00000p
displays the following:
This screen shows that an SPDU was received and that an SPDU (a refuse) was sent in
response.
The INFO ENTRY #APPL command reveals the addresses that the OSI manager
process uses to configure the various processes and service-related characteristics (you
can also use the CHECK ENTRY command to obtain this information). In the SCF
command, use the name of the application included as a parameter to the
APS_ASSOC_ATTACH_ call.
OSIAS Stats SU \MARS.$TAP1.#Z00000P
Session Start Time.. 16 Oct 1991, 13:39:14.384
Reset Time.......... 16 Oct 1991, 13:39:14.384
Sample Time......... 16 Oct 1991 13:40:28.009
Received Sent
Total SPDUs............... 1 1
Total SPDU Bytes.......... 547 8
Total SS-Userdata Bytes... 0 0