OSI/AS Configuration and Management Manual

Troubleshooting Guide
OSI/AS Configuration and Management Manual—424119-001
8-28
Troubleshooting Example
This screen also displays the name of the subordinate Layer 4 subdevice,
$TSP1.#Z00000P. Use the STATS command to check the number of TPDUs sent and
received in Layer 4.
The SCF command
stats su $tsp1.#z00000p
displays the following:
This screen shows that four TPDUs have been sent and received by this Layer 4
subdevice.
Now you should use the STATUS SU command to check the state of the Layer 4
protocol; the state is TCON-IN-PROGRESS.
OSITS Stats SU $TSP1.#Z00000P
Reset Time.. 16 Oct 1991, 13:39:14.305
Sample Time. 16 Oct 1991, 13:49:40.004
TPDUsSent.. 4 TPDUsRecv.. 4
TPDUsResent 0
UserBytesSt 8 UserBytesRc 547
ExpBytesSt. 0 ExpBytesRc. 0