OSI/AS Configuration and Management Manual

Troubleshooting Guide
OSI/AS Configuration and Management Manual—424119-001
8-29
Troubleshooting Example
The SCF command
status su $tsp1.#z00000p,detail
displays the following:
The TC-Substate field in this screen shows that Layer 4 is enabled to wait for a transport
connection. It also shows, however, that Layer 4 is not yet in the data transfer state,
which is necessary to establish a session connection. Nevertheless, there must have been
a transport connection before the CN-SPDU could arrive. Therefore, you can only
assume that the Layer 4 connection was established temporarily, and that the refuse
SPDU response resulted in the Layer 4 subdevice being disconnected.
Step 3 Alternative: CHECK SU
Instead of using the STATUS SU commands shown earlier in this step, you can use the
CHECK SU command. For example, both the following commands return similar
information:
status su $tap1.#z00000p, detail
check su $tap1.#z00000p, detail
Similarly, both the following commands also return the same information:
status su $tsp1.#z00000p, detail
check su $tsp1.#z00000p, detail
OSITS Detailed Status SU \MARS.$TSP1.#Z00000P
State........ STARTED StopOpens....... OFF
TC State..... tcon in progress Opens........... 1
TC Substate.. waiting for CR-TPD Opener Id. 255,017
Opener....... \MARS.$6,190
NSP SU....... \MARS.$X251.#TSP100N
NSP Subsys....... X25AM
FileError........ 0
NSPDSMRetCode.... 0 CreateTime.... 16 Oct 1991, 11:01:10.100
NSPDSMSubCode1... 0 LastOpenTime.. 16 Oct 1991, 11:10:10.100
NSPDSMSubCode2... 0 LastAlterTime.
NSPFSErrorCode... 0 LastCloseTime.
X25ClearCause.... 0
X25DiagCode...... 0
X25DisconReason.. 0 0 0 0
Class....... 2 Checksum.... OFF
DeleteTime.. -1 T-Expedited. OFF
TPDU Format. Normal TPDU Size... 4096
Receive Credit... 4 Sending Credit 0
LocalTSEL........ 4444444401
RemoteTSEL.......
LocalNSAP........ 408333111101
RemoteNSAP.......
LANLocalSNPA.....
LANRemoteSNPA....
X25DestAddr...... 123409 X25Port..... 9