OSI/AS Configuration and Management Manual

Troubleshooting Guide
OSI/AS Configuration and Management Manual—424119-001
8-39
Troubleshooting Example
Step 3: Review the Statistics Using SCF
It might be helpful to check the statistics for the subsystem. This gives you an overview
of whether the OSI manager process was able to register subdevices to the TAPS
processes as a result of the application call to APS_ASSOC_ATTACH_.
The SCF command
stats subsys $omgr
displays the following:
This screen shows that the attach request was registered and that no immediate failures
were noted by the OSI manager process.
OSIAS Stats SUBSYS \MARS.$OMGR
Reset Time..... 15 Oct 1991, 4:16:19.040
Sample Time.... 15 Oct 1991, 4:17:10.474
Configuration:
Current Maximumever
TAPS Process... 2 2
TSP Process.... 2 2
NSP Process.... 4 4
APPL Entry..... 4 4
TSEL Entry..... 4 4
NSAP Entry..... 4 4
SNPA Entry..... 4 4
L3 Profile..... 2 2
L4 Profile..... 2 2
L5 Profile..... 2 2
Register Requests:
Received....... 2
Succeeded...... 2 Failed.......... 0
Failure Reasons:
Loc Name Not Found. 0 Rem Name Not Found. 0
Loc TSEL Not Found. 0
Loc NSAP Not Found. 0 Rem NSAP Not Found. 0
Loc SNPA Not Found. 0
NSP Not Started.... 0
TSP Not Started.... 0 TSP ADD SU Failed.. 0
TAPS Not Started... 0 TAPS ADD SU Failed. 0
L3 Prof Not Found.. 0 L4 Prof Not Found.. 0
L5 Prof Not Found.. 0
Internal Error..... 0