OSI/AS Configuration and Management Manual

Troubleshooting Guide
OSI/AS Configuration and Management Manual—424119-001
8-48
Troubleshooting Example
The SCF command
info su $tsp2.#z000022,detail
displays the following:
Comparing the transport PDU parameters from the PTrace screen with the SCF
attributes, you can see that the only attribute that doesn't match is the RECVSECURITY
attribute. The TSP subdevice is configured for password as a RECVSECURITY value;
the CR-TPDU is sending password as a security parameter. This must be the reason the
TSP process responded with a disconnect request.
OSITS Detailed Info SU $TSP2.#Z000022
*AltClass.......... 2 *Checksum.......... ON
*Class............. 2 *ConnectTimeout.... 0:00:06.000
*DeleteTime........ -1 *DisconnectTimeout. 0:00:06.000
*Expedited......... OFF *ExtendedFormat... OFF
*InactiveTimeout... 0:00:30.000 *IPNullLayer....... OFF
*IPX25SNDCF........ OFF *L4Window.......... 4
*LANlocalSNPA...... 02
*LANremoteSNPA.....
*LocalNSAP.........
*LocalTSEL......... 4444444402
*MaxRexmit......... 3 *Multiplex......... ON
*NetType........... B *NSPDevice......... \MARS.$X252
*RecvSecurity...... passwart
*RefTimeout........ 0:01:40.000
*RemoteNSAP........
*RemoteTSEL........
*RexmitTimeout..... 0:00:10.000
*SendSecurity...... password
*TConPri........... 0 *TPDUsize.......... 4096
*TTRTimeout........ 0:01:30.000 *TWRTimeout........ 0:02:00.000
*WindowTimeout..... 0:00:10.000 *X25AcceptChg...... OFF
*X25BCUG........... *X25CUG............
*X25CUGType........
*X25DestAddr....... 408333222202
*X25Negotiate...... L3WINDOW
*X25Port........... 2 *X25PriCall........ OFF
*X25PVC............ *X25RemoteNet......
*X25ReverseChg..... OFF
*X25RPOA...........
*X25Thruput........ ( 0,0 ) *X25TransitDelay...