OSI/AS Configuration and Management Manual

Troubleshooting Guide
OSI/AS Configuration and Management Manual—424119-001
8-58
Troubleshooting Example
The SCF command
STATS SERVICE $TSP1.#L4
displays the following:
This screen shows that no TPDUs were sent or received by the TSP process. This
indicates that the problem is not due to the TSP process, and implies that the problem
originates in a lower layer.
Next you should look at the NSP statistics for Layer 3 to verify whether a connection
occurred. But first you need to find out the line name.
Either of the SCF commands
status su $tsp1.#z000022 ,detail
check su $tsp1.#z000022 ,detail
displays a status screen from which you can get the line name. An example screen is
included in the troubleshooting example for the TAPS process. In this case, the screen
would show that the line name is $X251.
OSITS Stats SERVICE $TSP1.#L4
Reset Time.. 16 Oct 1991, 5:21:42.651
Sample Time. 16 Oct 1991, 5:24:33.238
TPDUs-sent................................... 0
TPDUs-received............................... 0
TPDUs-resent................................. 0
UserBytes-sent............................... 0
UserBytes-received........................... 0
ExpBytes-sent................................ 0
ExpBytes-received............................ 0
Credit-Reductions............................ 0
InboundCRConfErr............................. 0
InboundCRConfErrThld......................... 0
InboundCRCongestion.......................... 0
InboundCRCongestionThld...................... 0
InboundCRProtoErr............................ 0
InboundCRProtoErrThld........................ 0
InboundTPDUProtoErr.......................... 0
InboundTPDUProtoErrThld...................... 0
InboundTPDUXsumErr........................... 0
InboundTPDUXsumErrThld....................... 0
L4Timeout.................................... 0
L4TimeoutThld................................ 0
OutboundCRConfErr............................ 0
OutboundCRConfErrThld........................ 0
OutboundCRErr................................ 0
OutboundCRErrThld............................ 0
OutboundTPDUProtoErr......................... 0
OutboundTPDUProtoErrThld..................... 0
Current-Tcon................................. 0
Max-ever-Tcon................................ 0