OSI/AS Configuration and Management Manual

Troubleshooting Guide
OSI/AS Configuration and Management Manual—424119-001
8-65
SCF Commands
Remember that this command returns information on all the protocols running on the
LAN controller, not just those related to OSI/AS.
The following command displays the total number of 802.3 frames transmitted and
received for the NSP process $LAM2. This command also returns a count of the number
of frames that were discarded, overruns, FCS errors, and collisions detected:
STATS SERVICE $LAM2.#L18023
The following screen is returned for this example:
The following command displays useful information about the aggregate SDUs:
STATS PORT $LAM1.*
The following screen is returned for this example:
Since the OSI IP is contained within the TSP process, traces and statistics on IP-related
problems must be gathered by the TSP process.
TLAM Stats SERVICE $LAM2.#L18023
Sample Time..... 16 Oct 1991, 12:05:08.244
Reset Time...... 16 Oct 1991, 0:00:46.734
802.3 (CSMA/CD) STATS
FramesDiscarded......... 0D LackOfResourceErrors. 0D
ReceiveOverruns......... 0D TransmitUnderruns.... 0D
FramesTransmittedOK..... 6056D FramesReceivedOK..... 17836D
OctetsTransmittedOK..... 557100D OctetsReceivedOK..... 1165725D
FCSErrors............... 0D AlignmentErrors...... 0D
DeferredTransmisssions.. 1D
TotalCollisionFrames.... 0D ExcessiveCollisions.. 0D
TotalCollisions......... 0D
LossofCTS............... 0D LossofCD............. 0D
TLAM Stats PORT $LAM1.#TSP1FE
Sample Time..... 16 Oct 1991, 11:54:51.581
Reset Time...... 16 Oct 1991, 10:55:50.116
Delivered AG SDUs........ 85D
Undelivered AG SDUs...... 0D
Sent AG SDUs............. 793D
File System Request
Control...0D Read....... 88D Write..... 793D
Writeread.0D SetMode.... 0D GetMode... 0D
Open......2D Close...... 0D ProcInfo.. 0D
CPUDown...0D CPUUp...... 0D Change.... 0D
DevInfo...0D SubdevInfo. 3D SubdevName 0D
GetParam..0D SetParam... 0D Other..... 0D