OSI/AS Configuration and Management Manual

Troubleshooting Guide
OSI/AS Configuration and Management Manual—424119-001
8-67
NSP Process: PAM
The screen returned for this command is as follows:
In the detailed hexadecimal section of this screen, you can see a CR-TPDU beginning at
%H00F (21E4). The IP header begins at data offset %H000 (0381).
NSP Process: PAM
In an OSI/AS subsystem, PAM is not considered to be a network service provider;this
function is included in the TSP process. Nevertheless, PAM is a distinct process that can
be analyzed separately when troubleshooting problems in the Data Link Layer and
below.
SCF Commands
The following command displays useful information about the aggregate SDUs:
STATS PORT $LAM1.*
The following screen is returned for this example:
Since the OSI IP is contained within the TSP process, traces and statistics on IP-related
problems must be gathered by the TSP process.
?FIND "LSAP : 000254"
02:49:29:370 >000.000 #1923 Data In
LIP Header
Func : Ag SDU ReqID : %H00000000D DSAP : Host Port
Mod : %H0000 CrtPID : %H0000 0000 0000 0000 SSAP : LIOP LLC1
Port Header
Work : 00000,00000 Version : 00000 Address : %H00FE
MAC Adr : %H0900 %H2B00 %H0004 SDU Count : 00001
LLC SDU Header(001)
LSAP : 000254 MAC Adr : %H0800 %H8E00 %H01A5
Control : 003 P F Flag : 000 Resp Flag : 00001
Priority : 000 SDU Size :00096
000: 0381 1D01 1E9C 003F 0000 0640 8333 1111
008: 1106 4083 3322 2212 0000 0000 003F 21E4
010: 0000 0005 40C1 0544 4444 4412 C205 4444
018: 4444 11C0 0109 C601 00C4 0100
PAM Stats PORT $LAM1.#TSP1FE
Sample Time..... 16 Oct 1991, 11:54:51.581
Reset Time...... 16 Oct 1991, 10:55:50.116
Delivered AG SDUs........ 85D
Undelivered AG SDUs...... 0D
Sent AG SDUs............. 793D
File System Request
Control...0D Read....... 88D Write..... 793D
Writeread.0D SetMode.... 0D GetMode... 0D
Open......2D Close...... 0D Change.... 0D
CPUDown...0D CPUUp...... 0D Other..... 0D
GetParam..0D SetParam... 0D