OSI/AS Configuration and Management Manual

Management Environment
OSI/AS Configuration and Management Manual—424119-001
2-12
ENTRY Objects
ENTRY Objects
ENTRY objects allow you to register TAPS, TSP, and NSP processes; local and remote
addresses; application entity titles; and locally defined application names with the OSI
manager process (that is, to enter them into the MIB). Each ENTRY object is an entry in
the MIB. The OSI manager process uses the information that you supply with ENTRY
objects to select processes and to set connection attributes at different protocol layers.
SCF Commands for ENTRY Objects
You can use the following SCF commands with the ENTRY object:
Types of ENTRY Objects
OSI/AS defines four different types of ENTRY objects. Table 2-2 shows the identifier
that you use for each type of ENTRY object.
ADD Adds an ENTRY object to the subsystem.
ALTER Alters the attributes of an ENTRY object.
CHECK Verifies the completeness of your configuration, and determines
the attributes that will be used for a connection.
DELETE Deletes an ENTRY object from the subsystem.
INFO Lists the attribute values of an ENTRY object.
NAMES Lists the names of the ENTRY objects registered with the
specified OSI manager process.
Table 2-2. Type Identifiers for ENTRY Objects
Type Identifier Description
SNPA Subnetwork point of attachment
NSAP Network service access point
TSEL Transport service selector
APPL Application name