OSI/AS Configuration and Management Manual

NSAP Addressing
OSI/AS Configuration and Management Manual—424119-001
3-2
SNPA Addresses Over LANs
In G-series OSI/AS subsystems that use the Port Access Method (PAM) subnetwork
services, the SNPA address of the TSP process is described as follows:
If IPNULLLAYER is set to ON, the SNPA is also a real MAC address and must be the
same as the NSAP.
LAN SNPA Address
Consists of... FE string followed by the TLAM station
address (MAC address; hardwired into the
controller)
Programmatically Fetched Using SCF
Command...
INFO SERVICE L2-service name
(this is optional, however, since the TSP
process automatically fetches the SNPA
address)
Configured Using SCF... Local SNPA address:
LANLOCALSNPA attribute (optional)
Remote SNPA address:
LANREMOTESNPA attribute
LAN SNPA Address
Consists of... FE string followed by the PAM station
address (MAC address; hardwired into the
LIF)
Programmatically Fetched Using SCF
Command...
INFO LINE L2-line-name
(this is optional, however, since the TSP
process automatically fetches the SNPA
address)
Configured using SCF... Local SNPA address:
LANLOCALSNPA attribute (optional)
Remote SNPA address:
LANREMOTESNPA attribute