OSI/AS Management Programming Manual

ADD ENTRY Command
Commands and Responses
5–20 056785 Tandem Computers Incorporated
ZOSI-MAP-ADD-ENTRY-NSAP
is an extensible structured token that contains the attributes for the specified
NSAP. ZOSI-DDL-ADD-ENTRY-NSAP contains the following fields:
ZL4-SERVR
is the indirect-process-name of the TSP process that services the NSAP being
added.
ZL4-PROF
is the name of the Layer 4 PROFILE to be used when a TSP subdevice is
configured for communication through the NSAP being added.
ZSNPA-LEN
is the length (in bytes) of the SNPA in ZSNPA. The range of values is 0
through 14 bytes.
ZSNPA
specifies the SNPA for the subnetwork that contains the local end system and
that corresponds to the NSAP being added. The value is a character string of
an even number of hexadecimal digits.
ZNETADDR-MODE
is the addressing mode of the network service. The values for this attribute
are as follows:
ZOSI-VAL-NETADDR-MODE-NORMAL 1984 X.25 network or any LAN
ZOSI-VAL-NETADDR-MODE-X25-1980 1980 X.25 network
The default value is ZOSI-VAL-NETADDR-MODE-NORMAL.
ZL3-PROF
is the name of the Layer 3 PROFILE to be used when an NSP subdevice is
configured for communication through the SNPA for the NSAP being added.
ZOSI-MAP-ADD-ENTRY-SNPA
is an extensible structured token that contains the attributes for the specified
SNPA. ZOSI-DDL-ADD-ENTRY-SNPA contains the following fields:
ZL3-SERVR
is the indirect-process-name of the NSP process that services the SNPA being
added.