OSI/AS Management Programming Manual

ADD ENTRY Command
Commands and Responses
5–24 056785 Tandem Computers Incorporated
#L3 (network) values:
1. #L3 PROFILE in remote #APPL ENTRY
2. #L3 PROFILE in remote #NSAP ENTRY
3. #L3 PROFILE in remote #SNPA ENTRY
4. #L3 PROFILE in local #APPL ENTRY
5. #L3 PROFILE in local #NSAP ENTRY
6. #L3 PROFILE in local #SNPA ENTRY
7. Local #L3 SERVICE
4. After obtaining the appropriate protocol-related attributes, the OSI manager
passes these values to the TAPS and TSP processes. The NSP subdevice
values are selected, then an ADD SU request is sent to the TSP process, which
in turn, creates an NSP subdevice.
All required servers and profiles can be selected with the ADD ENTRY #APPL
command, or by using a combination of the ADD ENTRY #NSAP, #SNPA and
#TSEL commands. The table below shows in which commands server and
profiles can be specified.
Server
ADD ENTRY
#APPL
ADD ENTRY
#TSEL
ADD ENTRY
#NSAP
ADD ENTRY
#SNPA
L5SERVER (TAPS) X X
L4SERVER (TSP) X X
L3SERVER (NSP) X X
L5PROFILE X X
L4PROFILE X X X
L3PROFILE X X X