OSI/AS Management Programming Manual

ADD PROCESS Command
Commands and Responses
056785 Tandem Computers Incorporated 5–29
ZSPI-VAL-TRUE indicates that the process will be started with a high PIN.
The default value is ZSPI-VAL-TRUE. This attribute is valid only for
Guardian 90 D series systems.
ZXNAME
specifies a TAPS, TSP, or NSP Guardian 90 process name of the server. This
attribute is for D series systems only. The equivalent token for C series
systems is ZNAME. It is used to run a process or to try to establish
communication with a process that is already running. NAME is the only
attribute that is used for NSP processes; all other attributes are ignored. This
is a required attribute; you must supply a value. The value is a TAPS, TSP, or
NSP process name in the following format:
$process-name
TAPS, TSP, and NSP process names can be up to 6 characters (the $ sign
followed by 5 characters). For example:
$TAPS1
$TSP10
$X2510
If two or more TSP processes share the same X25AM line, the first 4 characters
after the $ sign are used by TSP to build the SU name and must be unique. For
example, the following three TSP processes share the same X25AM line:
$TSP10
$TSP20
$TSP30
TSP processes on D-series systems that communicate with applications on
remote C-series systems can have names up to 5 characters (the $ sign
followed by 4 characters). For example:
$TSP1
$TSP2
ZXNAME-LEN
is the length of the ZXNAME field.
ZCOM-TKN-CMD-TIMEOUT
is described in the Communications Management Programming Manual.
ZSPI-TKN-RESPONSE-TYPE, ZSPI-TKN-ALLOW-TYPE, and ZSPI-TKN-
COMMENT
are described in the Distributed Systems Management (DSM) Programming Manual.