OSI/AS Management Programming Manual

ADD PROFILE Command
Commands and Responses
5–38 056785 Tandem Computers Incorporated
ZNETTYPE
is the quality of network service. The default value is ZOSI-VAL-NETTYPE-
A. The values for this field are as follows:
ZOSI-VAL-NETTYPE-A
The network connection has an acceptable residual error rate, not signaled
by disconnects or resets, and has an acceptable rate of signaled errors.
ZOSI-VAL-NETTYPE-B
The network connection has an acceptable residual error rate, not signaled
by disconnects or resets, but has an unacceptable rate of signaled errors.
ZOSI-VAL-NETTYPE-C
The network connection has an unacceptable residual error rate.
ZCLASS
is the preferred transport protocol class to be used. The values for this field
are as follows:
ZOSI-VAL-CLASS-0
ZOSI-VAL-CLASS-1
ZOSI-VAL-CLASS-2
ZOSI-VAL-CLASS-3
ZOSI-VAL-CLASS-4
For LAN networks, and for X.25 networks when the Layer 3 attribute ZIP-X25-
SNDCF is set to ZSPI-VAL-TRUE, ZCLASS must be ZOSI-VAL-CLASS-4. The
default value for ZCLASS is determined by the values of ZNETTYPE and
ZMULTIPLEX as follows:
If ZNETTYPE is and ZMULTIPLEX is set to then ZCLASS
A ZSPI-VAL-TRUE 2
A ZSPI-VAL-FALSE 0
B ZSPI-VAL-TRUE 3
B ZSPI-VAL-FALSE 1
C ZSPI-VAL-TRUE 4
C ZSPI-VAL-FALSE 4
The default is no ZCLASS value specified.